Food homogenizer
Homogenizer is a device used for creation of a uniform homogeneous physically stable blend. As a rule, the blend is made up of two or more mutually insoluble. Therefore, the homogenization process creates a stable uniform structure in a system of mutually insoluble materials. The size of the obtained particles define the duration of blend homogeneity. The smaller the particles, the longer the structure of the product can be maintained.
Homogenization is extensively used as one of the most progressive technological processes to radically improve the quality of the product. It is used in production and improvement of many substances, such as fish and meat pate, milk and dairy products, ice-cream and yoghurt, mayonnaise and ketchup, jam etc.
Food homogenizer principle.
This device reduces the size of the dispersed phase particles to 5 microns. At the same time it thoroughly mixes it with the liquid phase. This leads to several advantages of the product, specifically: slower phase separation or complete elimination of separation, increased viscosity, improved quality of the food.
(destruction of fat molecules in milk by homogenizer)
Inside the homogenizer, the product is mixed between the rotation and stationary calibrated parts with radially skewed teeth.
. 
The centrifugal forces and the high relative speed of the moving and stationary parts of the colloid mill cause liquids and semi liquids to become homogeneous, uniform and finely dispersed. The homogenizer simultaneously disperses and homogenizes the product. Addition of a heating or cooling jacket allows application or dissipation of heat to or from the work zone. The homogenizer features high stability and allows producing highly stable emulsions as well as colloid suspensions with particles size as low as 5 micron.
Besides, the device features cavitation effect, i.e. explosions of caverns in the product by internal pressure.
Homogeniser can be retrofitted into existing production lines.Quality production requires that components for processing be fed to the homogenizer in a certain constant ratio and rate.
Particle size and fluidity of the product may vary depending on material and additive properties.
| № | Parameter | CLM – 4.1 |
| 1 | ***Capacity rated (on the water), m3/hour, up to. | 4 |
| 2 | Operating pressure, bar. | 0,5 |
| 3 | Rotation speed, RPM. | 3000 |
| 4 | **Max heat carrier temperature, °С. | 160 |
| 5 | **Minimum coolant temperature, °С. | -4 |
| 6 | Dispersion, microns. | <50 |
| 7 | Nominal pressure/suction bore diameter, mm. | 32/65 |
| 8 | Drive power, kW. | 5,5 |
| 9 | *Dimensions, mm:- length
– width – height |
960
310 400 |
| 10 | Weight, kg. | 125 |
Note.
* – Dimensions are driven assembly.
** – If necessary, the product can be either heated or cooled to a desired temperature.
*** – Depending on the physical and chemical characteristics of the product capacity may vary.
The main advantages of CLM homogenizers are:
- Modern equipment design and world class quality
- Competitive price
- Qualified engineering advice
- The efficiency and speed of mixing at times more than a turbine agitator
- Savings on storage capacity compared with a turbine agitator – colloid mill built into a production line and does not require additional tanks
- Stability of the blend is ensured
- An optional heating or cooling jacket can be installed
- The gap in the mill’s grinding zone can be adjusted without the need to disassemble the mill from the production line
- The fineness of grinding in the homogenizer can be down to 1 micron
- The homogenizer is built with components from world renowned suppliers
- The system operates in the temperature range from -30 С° to 180 С°
- Soundproofing can be optionally installed.
Our homogenizers are already in operation in many successful companies around the world. They have already produced tons of water bitumen emulsions, mastic, grease, liquid rubber etc.
Feedback of GlobeCore’s customers
Mr. Shekanabo, the United Republic of Tanzania:
“I can only say good things about GlobeCore mills. After seeing the production facility, I had no doubts that this is a serious and reliable company with professional staff, and the system works like a clock. Of course, the production itself seems complicated, but the equipment is powerful and rugged.”
How to purchase:
Edewechter Landstraße 173, Oldenburg-Eversten, Deutschland, 26131