Medium setting bitumen emulsion EBC-2 and EBPC-2

GlobeCore manufactures high quality units for production of cationic bitumen emulsion EBC-2 and polymer-bitumen emulsion EBPC-2. The characteristics of these emulsions deserve a more detailed examination.

GlobeCore bitumen emulsion equipment

An essential component of water-bitumen emulsion is the emulsifier surfactant. By chemical nature, surfactants are divided into several types, depending on the charge of its particles. The most widely used surfactants in the road construction industry are anionic and cationic. Due to versatility and good adhesion, the used of EBC cationic water bitumen emulsions is preferred to in construction and repairs of modern roads.

The amount of the surfactant influences the emulsion breakdown time in contact with the filler, that is, the time when bitumen precipitating from the emulsion reaches its initial state. Based on the amount of emulsifier used, cationic water bitumen emulsions may be divided into three types: EBC-1, EBC-2 and EBC-3. The emulsion breaks down in contact with the mineral material due to water evaporation, as well as absorption of water and emulsifier by the filler.

EBC emulsions are divided into three groups based on setting rate:

  • quick setting (EBC-1);

  • medium setting (EBC-2);

  • slow setting (EBC-3).

Therefore, EBC-2 water bitumen emulsion is a medium setting (5 – 10 minutes) cationic emulsion, containing mostly positively charged particles and used extensively as a binder in road construction. EBC-2 bitumen emulsion is perfect for surface treatment and road layer construction by saturation, preparation of black gravel and porous gravel mix. EBC-2 is durable, does not cause burns and significantly decreases environmental effects.

Recently, the demand for modified bitumen emulsions with polymer additives is increasing. Modified medium setting cationic emulsions are called EBPC-2. Such emulsions significantly improve properties of the product, such as temperature range, durability, elasticity and strain resistance.


обновлено: February 7, 2014 автором: globecore