UVB-1 (1 m3 / hour)

GlobeCore is proud to present you bitumen emulsion production units UVB-1, developed and produced by the company.

Currently the “cold” processes for production of bituminous construction materials are becoming universally accepted. Such materials include asphalt-concrete mixes, roofing, waterproofing, VODIPREN® COMPOUND liquid rubber for seamless waterproofing, etc.

The use of water-bitumen emulsions is especially promising in the field of road construction and repairs, waterproofing of roofs, vessels, basements, as well as treatment of metal surfaces. Water-bitumen emulsions, unlike hot bitumen binding, save up to 30% bitumen, up to 40% gravel and reduce power consumption by 1.5.

Emulsions facilitate high degree of adhesion between the lower and the new layers of coating, increased durability of the coating and extend construction period from early spring to late fall (as long as ambient temperature is above 5ºС). The coating can be applied to wet surfaces. These coatings are environmentally friendly and are easy to transport and store.

The units are made for different throughput capacities, so as to optimize production for the required volume of product.

 

SPECIFICATIONS

of stock bitumen equipment.

Parameter

Value

1 Maximum capacity (including preparation time), m3/hour

1

2 Consumption of bitumen (90…130 penetration), m3/hour

0.97

3 Water consumption, m3/hour

0.6…0.7*

4 Solvent consumption (penetration below 90), dm3/hour

0…50*

5 Acid consumption, dm3/hour

1…20*

6 Emulsifier consumption, dm3/hour

1…20*

7 Adhesion additive consumption, dm3/hour

1…20*

8 Bitumen pressure at inlet, max MPa

0.2

9 Bitumen pressure at mixer inlet, MPa

14…16

10 Water pressure at mixer inlet, MPa

0.2

11 Bitumen temperature at inlet, 0С

140-160

12 Water temperature at inlet, 0С

40-60

13 Emulsion output height, max, meters

15

14 Power, kW max

17

15 Voltage at 50Hz, V

380

16 Compressed air pressure, bar

4…6

17 Air consumption, dm3/minute

100

18 Dimensions, mm max:

     -length

2250

     -width

1750

     -height

1840

19 Weight, kg max

1050

* According to emulsion recipe!


УМБ-1

Unit description

Water bitumen unit UVB-1 is designed for production of anionic or cationic emulsions, which are used in road construction for:

  • tack coating of old road top before application of asphalt concrete layer;
  • production of cold asphalt concrete mixes;
  • surface treatment of road top;
  • thin protective layers;
  • patching of roads.

The unit can be used by facilities producing asphalt concrete mixes.

The unit may be operated both indoors and outdoors under adequate cover.

12 months warranty from commissioning. Worldwide delivery.

обновлено: August 22, 2016 автором: globecore