News

September 15, 2017

Improve the quality of bitumen using UMB-6 plant

How can I improve the quality of bitumen? What is the difference between modified bitumen and common non-modified bitumen? What equipment is used for bitumen modification?

Bitumen is one of the most common materials in construction. It is used in roofing and waterproofing works, construction and repair of road surfaces, the protection of pipelines, the lining of canals,

But with all the advantages, bitumen has one...


September 4, 2017

Commissioning of a UVB-10PK Bitumen Complex in Ghana

A team of GlobeCore specialists visited Accra (Ghana) in August for commissioning and personnel training.

This time, the team commissioned a UVB-10PK bitumen complex, which consits of several sections, each with its own function:

bitumen input; preparation of bitumen; production of all emulsion types; emulsion storage and output.

Operating such equipment optimizes motorway repairs and construction, since some of the operations can be performed at the same time (e.g. accepting...


April 30, 2016

Roads of Ghana are Built and Repaired with GlobeCore Equipment

In April, representatives of our company visited Ghana to access the current state of a UVB-1 plant.

This equipment was sold in 2012 and has since produced 40000 m3 of bitumen emulsion. This material is in demand in Ghana, as this country is badly in need of building new and repairing the existing automobile roads.

Application of bitumen emulsions in road construction industry boosts the quality...


April 8, 2016

Opening of a new service center in Houston

Dear customers! We are pleased to announce  excellent news.  A new GlobeCore service center opened in US

Now GlobeCore equipment and customer support services have become more accessible and operational.

Visit us. We are located on 1750-H Dickinson Ave (FM 1266) Dickinson, TX, 77539.

Call our office:  1-713-429-1616 and + 1-713-828-7877.

Addresses of other offices can be found in the section “Contacts”.

...

December 10, 2015

GlobeCore Makes Equipment Presentations in Bulgaria

A number of presentations of GlobeCore products were made to representatives of the Bulgarian road construction industry from 18 to 24 October 2015.

The events were held in Sofia, Plovdiv, Ruse, Blagoyevgrad and other important Bulgarian cities.  GlobeCore representatives provided the attendees information on both the company and on the products such as bitumen emulsion production unit UVB-1, polymer bitumen modification units UVB-2 and bitumen laboratory equipment.

The high interest of Bulgarian...


August 12, 2015

GlоbeCоre Begins to Manufacture New Equipment for Peanut Butter Production

In the first quarter of this year, GlоbeCоre announced the start of the production of new lines for peanut butter preparation.

More than 4 million tons of peanut butter are produced in the world annually because of its high demand in the cooking and baking industries, cosmetology, confectionary and pharmaceutical industries.  The xport and consumption of this product however, differs considerably in different countries due to the peculiarities of the different...


February 28, 2015

UVB-1 Bitumen Emulsion Plant was Launched in Azerbaijan

Early February, members of GlobeCore had a business trip to Baku (Azerbaijan).  The purpose of the trip was commissioning and launching of the previously supplied UVB-1 plant (capacity of 2 m3/h), designed to produce bitumen emulsions.

The project was completed on time,  in full compliance with international quality standards – which allowed the workers of Azerbaijan to start  production of bitumen emulsions.

Today bitumen emulsions are generally used for:

Surface treatment.  The main...

September 25, 2014

Specifics of bitumen emulsion modification

Water-bitumen emulsion is a highly dispersed dark brown material made by atomization of bitumen in water solution of an emulsifier.

Such methods of bitumen thinning as organic solutions and hot mastics are prohibited in several European countries due to environmental and health hazards. A better and more efficient method is emulsification. The process is becoming more popular, replacing the other methods and taking its well deserved place in the market.

Although emulsion...


September 25, 2014

UVB-1 bitumen emulsion unit, 1 m3/hour production capacity

The UVB-1 plant is designed for production of anionic and cationic bitumen emulsion used in repairs and construction of roads, as well as liquid rubber, which can be used for roofing. A 1 cubic meter per hour unit is ideal for small repair facilities with everyday needs of 6 – 9 tons of emulsion.

Bitumen emulsions were first used in Europe in the 1930s. Since then, the industry has seen many...


September 24, 2014

UVB-L bitumen emulsion plant (lab system)

This product is designed for testing of known recipes of emulsions, primers and liquid rubber. It can also be used for development of new materials and emulsifiers and the corresponding research and experiments.

The UVB-L is used in asphalt-concrete production facilities and in specialized research laboratories with great success.

The advantage of these units are:

small size; small power consumption; ability to use minimal amounts of products for experiments; easy readjustment for production of various samples; simple...

UVB-1 bitumen emulsion plant, 2 m3/hour production capacity

The UVB-1 2m3/hour bitumen emulsion plant makes cationic and anionic bitumen emulsions. The emulsion can be used for the following purposes:

     tack coating before application of asphalt-concrete      production of cold asphalt concrete mixes      surface treatment of roads      thin protective film      patch repairs of roads      water proofing of buildings and structures      construction of soft roofs      production of liquid rubber spray

UVB-1 (2 m3/hour) can be used by asphalt concrete mix production facilities. The plant can be installed and operated either...


September 5, 2014

UVB-1 bitumen emulsion plant, 2 m3/hour production capacity

he UVB-1 2m3/hour bitumen emulsion plant makes cationic and anionic bitumen emulsions. The emulsion can be used for the following purposes:

     tack coating before application of asphalt-concrete      production of cold asphalt concrete mixes      surface treatment of roads      thin protective film      patch repairs of roads      water proofing of buildings and structures      construction of soft roofs      production of liquid rubber spray

UVB-1 (2 m3/hour) can be used by asphalt concrete mix production facilities. The plant can be installed and operated either...


September 2, 2014

UVB-1 bitumen emulsion unit, 1 m3/hour production capacity

The UVB-1 plant is designed for production of anionic and cationic bitumen emulsion used in repairs and construction of roads, as well as liquid rubber, which can be used for roofing. A 1 cubic meter per hour unit is ideal for small repair facilities with everyday needs of 6 – 9 tons of emulsion.

Bitumen emulsions were first used in Europe in the 1930s. Since then, the...


March 20, 2014

GlobeCore opens service center in South Africa

Visit our new office: 35 Main Road, Anderbolt Ext 31, Boksburg Gauteng, South Africa.
Tel: +27761054167
Att: Mr. Frank May

...

February 11, 2014

Colloid mill CLM-4 for Bitumen

Colloid mill CLM, referred to as the mill throughout this text, is specially designed for the production of highly stable colloidal solutions, extremely fine suspensions, mixtures and emulsions. “Wet” grinding technique is used, as the rotor and stator cone gap is wider at the inlet and narrower at the outlet. Additionally, the complex micro relief of the generator (stator) surface creates increased turbulence, shearing the particles.Under the influence...


December 26, 2013

GlobeCore has increased the production facility floor by 8,000 square meters

GlobeCore has increased the production facility floor by 8,000 square meters.

...

October 18, 2013

GlobeCore reaching across continents. Industrial expo in North America

At the annual International Summer Meeting on Electricity, Industrial application that was held this year in Acapulco, Mexico 7-13 July, GlobeCore’s oil vacuum regeneration system UVR was presented at the booth of Apfelbaum Inc.

Our young team consisting of Olga Vorkun, lead export departement manager, and Evgeniy Svirid, lead engineer, have demonstrated the process of used oil treatment and focused attention of visitors on transformer oil regeneration technologies. Evgeniy...


June 10, 2013

GlobeCore at social networks

Follow us at the most popular social networks:

          ...

May 27, 2013

CLM – 18 Colloid mill

The product is designed and serially produces by our company.

Colloid mill CLM, referred to as the mill throughout this text, is specially designed for the production of highly stable colloidal solutions, extremely fine suspensions, mixtures and emulsions. “Wet” grinding technique is used, as the rotor and stator cone gap is wider at the inlet and narrower at the outlet.

Additionally, the complex micro relief of the generator (stator) surface creates...


обновлено: July 13, 2017 автором: globecore