{"id":36,"date":"2013-05-30T15:27:35","date_gmt":"2013-05-30T12:27:35","guid":{"rendered":"http:\/\/globecoremill.com\/en\/?page_id=36"},"modified":"2020-04-15T11:36:47","modified_gmt":"2020-04-15T11:36:47","slug":"colloid-mill","status":"publish","type":"page","link":"https:\/\/mill.globecore.com\/solutions\/colloid-mill\/","title":{"rendered":"Colloid Mill"},"content":{"rendered":"

The CLM colloid mill is specifically designed for production of highly stable colloid solutions, super-fine suspensions and emulsions. The mill applies the wet milling principle due to the rotor and stator cones\u2019 larger gap width at the input and smaller gap width at the outlet.<\/p>\n

Additionally, the complex geometry of the rotor surface creates intensive turbulence to shear particles.<\/p>\n

\"\"<\/p>\n

\n

CLM \u2013 18 colloid mill<\/em><\/a><\/p>\n

\"\"<\/p>\n

CLM \u2013 22 colloid mill for bitumen emulsion<\/em><\/a><\/p>\n

The product in the mill is ground between the rotating and stationary calibrated cylindrical radially skewed teeth of the rotor and stator.<\/p>\n

The centrifugal force and high velocity of the rotor relative to the fixed stator cause liquid and semi-liquid materials to become homogenic and finely dispersed.<\/p>\n

The mill simultaneously disperses and homogenizes materials.<\/p>\n

A heat jacket allows to apply or dissipate heat to or from the grinding zone.<\/p>\n

The mill features high performance capacity, allows to produce highly stable emulsions, as well as colloidal suspensions, ensures high degree of homogenization and particle size to 1 micron.<\/p>\n

Processes are intensified by 100 – 600% compared to agitator.<\/p>\n

Besides, the device creates cavitation, i.e. explosion of caverns by internal pressure.<\/p>\n

The mill can be retrofitted into existing production lines.<\/p>\n

For high quality grinding the product must enter the mill in certain proportions at constant rate.<\/p>\n

The degree of granulation and pumping qualities may vary depending on the mechanical properties of the material and the carrier phase.<\/p>\n

<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
No<\/strong><\/td>\nPARAMETER<\/strong><\/td>\nCLM – 22.2<\/strong><\/td>\nCLM – 18.1<\/strong><\/td>\nCLM – 4.1<\/strong><\/td>\nCLM – 05.3<\/strong><\/td>\n<\/tr>\n
1<\/td>\n***Capacity rated, m\u00b3\/hour, up to.<\/td>\n22<\/td>\n18<\/td>\n4<\/td>\n1,8<\/td>\n<\/tr>\n
2<\/td>\nOperating pressure, bar.<\/td>\n0,5<\/td>\n0,5<\/td>\n0,5<\/td>\n0,5<\/td>\n<\/tr>\n
3<\/td>\nRotation speed, RPM<\/td>\n3 000<\/td>\n3 000<\/td>\n3 000<\/td>\n3 000<\/td>\n<\/tr>\n
4<\/td>\n**Max heat carrier temperature, \u00b0C<\/td>\n160<\/td>\n160<\/td>\n160<\/td>\n160<\/td>\n<\/tr>\n
5<\/td>\n**Minimum coolant\u00a0 temperature, \u00b0C<\/td>\n-4<\/td>\n-4<\/td>\n-4<\/td>\n-4<\/td>\n<\/tr>\n
6<\/td>\nDispersion, micron<\/td>\n<50<\/td>\n<50<\/td>\n<50<\/td>\n<50<\/td>\n<\/tr>\n
7<\/td>\nNominal pressure\/suction bore diameter, mm<\/td>\n80\/120<\/td>\n80\/80<\/td>\n32\/65<\/td>\n32\/32<\/td>\n<\/tr>\n
8<\/td>\nDrive power, kW<\/td>\n55<\/td>\n11<\/td>\n5,5<\/td>\n3<\/td>\n<\/tr>\n
9<\/td>\n*Dimensions, mm<\/p>\n

– length<\/p>\n

– width<\/p>\n

– height<\/td>\n

 <\/p>\n

1440<\/p>\n

430<\/p>\n

650<\/td>\n

 <\/p>\n

1000<\/p>\n

400<\/p>\n

460<\/td>\n

 <\/p>\n

960<\/p>\n

310<\/p>\n

400<\/td>\n

 <\/p>\n

960<\/p>\n

310<\/p>\n

400<\/td>\n<\/tr>\n

10<\/td>\nWeight, kg<\/td>\n490<\/td>\n135<\/td>\n125<\/td>\n125<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Note.<\/strong>
\n* – Dimensions are driven assembly.
\n** – If necessary, the product can be either heated or cooled to a desired temperature.
\n*** – Depending on the physical and chemical characteristics of the product capacity may vary.<\/p>\n

The main advantages of the wet grinding GlobeCore colloid mills are:<\/h2>\n